Product Information
Component Video Over Cat5 Distrubution Hubs
Features:
• Supports component HDTV video, analog audio,
digital audio and external infrared systems
• Capable of transmitting 1080i signals up to 300’ over
Cat5 and 500’ over Cat6
• More convenient than running 5 separate coaxial cables
• Maintains original A/V signal strength for distribution
• Supports 480i, 480p, 720p, 1080i & 1080p resolutions
Product Description
The CT-CATTX and CT-CATRX are used in unison
to distribute component video, digital audio and analog
audio over two Cat5 4 pair UTP cables. The units
both support external IR control units. Formats as
advanced as 1080i can be transmitted up to 300 feet
over Cat5 and as far as 500 feet over Cat6.
The CT-CATTX has one set of RCA inputs and one
set of RCA loop-through connectors to go to an
additional transmitter if installed. The unit allows any
audio / video source with Y, Cb, Cr or Y, Pb, Pr
outputs (component) to distribute audio and video to
distant locations with excellent picture quality. This
unit will also support digital audio.
The CT-CATRX supports one monitor with
component video, right and left audio and digital audio.
The RX has an adjustable equalizer to correct for
signal loss caused by long cables. An optional
external IR system can be used with IR jacks.
VIDEO SPECIFICATIONS
- Nominal Input Level: 1 Volt Peak to Peak
- Gain 1 Volt Into 75 Ohms
- Input Impedance: 75 Ohms +/-5%
- Output Impedance: 75 Ohms +/-5%
- Port to Port Isolation: >65 dB
- Out to In Isolation: >80 dB
- Return Loss: >30 dB
- Video Bandwidth: >75 MHz
- Distance: 300 Feet & 1080i
- 500 Fee Using Cat6
AUDIO SPECIFICATIONS
- Nominal Input Level: 1 Volt Peak to Peak
- Gain: Unity
- Input Impedance: 22K Ohm
- Output Impedance: 1K Ohm
- Frequency Response: 20 Hz to 100 kHz
- Signal to Noise: 80 dB @ 1 Volt (out)
DIGITAL AUDIO
- Supports standard SPDIF digital audio.
POWER SPECIFICATIONS
- External 9 Volt AC @ 600 mA with a
- 2.1mm center coaxial connector (included)
